Tests on control panels
Test overview
■ Purpose
To conduct a seismic test of the control panel and confirm that there is no abnormality in operation
■ EUT
W600 × D450 × H1900 ㎜, 250 kg
■ Test conditions
Reference standard: JIS C 60068-3-3
- Vibration waveform: Sine beat wave
- Acceleration level: 6.0 m/s2
- Frequency: 5 Hz, 7.5 Hz, 11.3 Hz, 25.3 Hz, 35 Hz and resonance frequency
- Number of cycles: 5 times
- Wave number: 10 Cycle
- Pause time: 2 seconds
■ Implementation
4 points on the bottom of the EUT were bolted.
A resonance exploration test was carried out before the seismic test, and the frequency with a response factor of 2 or more was adopted as the resonance frequency.
Operation was confirmed by energizing during sine beat wave excitation.
Fig. 1 Example of vibration waveform (5 Hz)
![](https://we-are-imv.com/wp/wp-content/uploads/2022/10/7b5b4a793b29d48c01c523258cab28f6.jpg)
Fig. 2 Horizontal excitation / Fig. 3 Vertical excitation
![](https://we-are-imv.com/wp/wp-content/uploads/2022/10/1992783d63b4003aa3a9752885fd3475.jpg)
Memo
Facilities used
Vibration test system: VS-12500-140
Vibration controller: K2 software Shock
Acceleration monitors: 6 points
Test time
6 hours/day