Tests of large railway vehicle according to JIS E 4031 (IEC 61373)
Test overview ■ Purpose To perform random vibration tests and shock test based on JIS E 4031: 2013 (IEC 61373 ...
Site Search
Search results of「」
710
-
-
Tests on actual transport vibration measurement and test programming
Test overview ■ Purpose In official standards such as JIS, conditions for the vertical direction are described...
-
Tests on control panels
Test overview ■ Purpose To conduct a seismic test of the control panel and confirm that there is no abnormalit...
-
Tests on large railway vehicle articles according to JIE 4031 Annex JA using the large 6-DOF vibration test system
Test overview ■ Purpose JIS E 4031: 2013 corresponds to IEC 61373 Edition 2.0, and in this case the test was c...
-
Tests on products to be installed in railway vehicles
Test overview ■ EUT Communications equipment mounted under the floor of the vehicle body, 700 mm × 600 mm × H6...
-
Thailand Test Laboratory
Thailand Test Laboratory We comit to work developing new facilities, acquiring analysis techniques, and propos...
https://we-are-imv.com/en/business/testlab/testcenter/thailand/
-
Thank you for your Inquiry.
Thank you for your inquiry. Thank you very much for your inquiry. Please wait a moment while we check the deta...
-
The computer monitor does not work.
Reason:. ( i) The monitor’s power supply is switched off. ( ii) The monitor is faulty. (iii) Failure of ...
-
The earth leakage detector works and the breaker trips.
Reason: (1) The emergency stop button is being pressed. (2) Poor insulation of the excitation coil (3) Insulat...
-
The K125LS: Max Displacement Video
The K125LS is a powerful asset to the package testing and aerospace industries. It has a maximum payload of 4,...
-
The K2 Controller
The K2 controller provides the precision and repeatability required to test with confidence during both produc...
-
The K2+: Introduction Video
IMV’s K2+ controller is full of new features! Watch this video to hear about them straight from IMV engineers....
-
The K200: Battery Testing Upgrade
The K200 has been upgraded for battery testing, making IMV even better suited to support the exploding EV batt...
-
The K350
The K350 was designed to meet larger-than-life demands. Frequency: up to 2,000 HzMaximum load: 78,700 lbf See ...
-
The new K2+ vibration controller – change now!
With the K2+ vibration controller, IMV has improved the usability and performance of the previous K2 model eve...
-
The optional software DB-2012/DS-2013Tr does not start.
The causes are as follows. ・Windows OS is no longer supported. (As of August 2020 Guaranteed operating system:...
-
The power amplifier does not turn on when the button to start running K2 is pressed in the ISM
Reason: semi-automatic mode.Solution:(1) Check that the fully automatic mode of the ISM utility is enabled. (2...
-
The Resonant Frequencies of Toys
Finding the resonant frequency of everyday objects with Sine vibration. See the whole post and join the conver...
-
The table is elevated before the breaker is switched on.
Reason: Solenoid valve has failed Solution: Check whether the shaking table is elevating with the circuit brea...
-
Thermal Shock Test
Thermal Shock Test What is a Cold Thermal Shock Test? The cold thermal shock test is a test to evaluate the re...
https://we-are-imv.com/en/business/testlab/thermal-shock-tests/