Vibration Controller
K2
Supports all types of vibration test.
The K2 controller provides the precision and repeatability required to test with condence during
both
product development and series production.
The K2 hardware and software has been developed in-house, giving IMV full design control of this
important part of a vibration system.
The K2 system offers enhanced functions and operability based on the most advanced technologies
and
incorporating feedback from our customers.
Features
User-friendly interface
-
Intuitive operation
Easily-recognised icons are used for file management.
-
Short-cut operations
The key operations are initiated using a simplified set of commands.
-
Help
Each stage of operation is supported by detailed help pages.
Easy-to-use functions
-
Web monitor
user can monitor a vibration test remotely by connecting over the internet.
-
Report generator
Results can be exported to Microsoft Word in a range of customised formats.
-
Scheduler
Define the test schedule and execute it in order.
Precision control capabilities
K2 employs high-resolution 24-bit A/D and D/A converters to achieve high-precision, repeatable control.
Safety interlock function
A hardware mute function operating independently of software provides complete protection for the vibration system and payload.
E-mail notification
Remote sites can be notified by email of any abnormality during testing or termination of a test.
Data saving
Test definitions and results are output from the K2 in CSV format.
System Composition
Software
Software
-
SINE
-
RANDOM
-
SHOCK
-
Multi SINE
-
Multi RANDOM
-
Multi SHOCK
Common optional software
CAPTURE：Analogue waveform signal data program
Provides analogue waveform signal capture, saved data can then be used as the reference of SHOCK, BMAC waveform controls or Random vibration PSD control.
| Sampling Frequency | 51.2 kHz maximum |
|---|---|
| Data Length | Maximum 5000 k points |
| Input Channel | Maximum 64 |
| Waveform edit/analysis function | Filtering, Frequency transfer processing, PSD transfer, Transmissibility ratio between channels |
SCHEDULER（Test scheduler）
Pre-defined tests can be executed in sequence.
Integrated Control System
Signals are available from K2 to control a climatic chamber, synchronising thermal and vibration tests.
TCP Communication Server
TCP communication server software that allows external applications to operate K2 applications and acquire vibration data and operating status by sending and receiving commands via TCP / IP.
Test Standard
Launcher/Test Standard
-
Launcher
Easily-recognised icons are used for file management.
-
Test Standard
A test file will be automatically generated upon selection of the test conditions defined by the test standards.
*Please refer to the following for the test standards
Optional Test Standard
The main test standards stored in the Launcher software (Ver 22.2.0.0 onwards) are as follows as of December 2022. The Launcher software is an option for the K2.
| JIS C 60068 | Sine, Random, Shock |
|---|---|
| JIS D 1601 | Automotive parts simulated long-life test |
| JIS E 4031 | Railway vehicle parts functional test, Simulated long-life test |
| JIS Z 0200 | Transportation test |
| JIS Z 0232 | Transportation test（Random） |
| JASO D 014 | Automotive parts functional tes |
| UN | Lithium-ion battery test recommendated by UN |
| ISO16750 | Automotive parts test |
| ISO12405 | Electric vehicle |
| IEC60068 | Sine, Random, Shock |
| IEC62660 | Random, Shock for secondary lithium-ion cells of electric vehicles |
| ISTA | Transportation test |
| IEC61373 | Railway vehicle parts functional test |
| ISO13355 | Transportation test （Random） |
| ISO4180 | Transportation test |
| ISO19453 | Electric vehicle parts |
| JIS E 3014 | Parts for railway signal |
| EIA 364 | Electrical connector performance test |
*Version upgrade will incur an additional cost.
